Paper Jet 14

Paper Jet 14
Hull#001 Built by Dudley Dix

Friday, February 3, 2017

Finishing up the Rudder

Ok, so I have been absent from my boat for quite a while. A second move to Orange County  California and the purchase of a new (to me) Beneteau F235 has put this project on hold for too long.  My goal now is to get this boat on the water this summer!

A few months ago I decided to at least tackle one of the smaller projects which was finishing the rudder.

A few things had to happen:

First of all I had to apply the finish to it. Previously I had put a couple of coats of laminating epoxy. So I sanded it smooth and applied a couple of coats of rub on polyurethane. It is one of my favorite easy finishes and I didnt want to hassel with varnish with all the nooks and cranies.

I attached the gudgeons to the rudder and used a phillips screw driver to make sure they were somewhat lined up



Next step was to attach the Ronstan Battlestick that I bought as a tiller extension




I ended up having an old neoprene diving "bootie" that was past its prime so I cut it up into strips and use 3M 4200 adhesive to glue it into place to hold the rudder straight in the "Cassette"


Not the prettiest solution but it should work fine. With that I would call this particular part done!